Operation Manual

ManualsBrandsLorus ManualsAMZ010

■

CHARACTERISTICS

1. Time/calendar display: Hour, minute, second,

month, date and day of the week

2. Time indication: 12-hour display format with

PM indicator and 24-hour display format are

available.

3. Stopwatch: The stopwatch can measure

up to 23 hours 59 minutes and 59 seconds

in 1/100-second increments. Lap time

measurement is available. Up to 15 lap times

can be stored in memory.

Memory recall function: Data obtained in

the Stopwatch mode can be recalled after

measurement.

4. Countdown timer: The countdown timer

can be set up to 23 hours 59 minutes and 59

seconds.

5. Daily alarm: The daily alarm can be set to

sound at the designated time on a 24-hour

basis. Three individual daily alarms can be set.

Single-time alarm: The Single-time alarm

sounds only once at a designated time and it

is disengaged automatically.

Five individual

single-time alarms can be set.

6. Second Time Zone: Time in a different time

zone can be displayed.

7. Chime: The chime can be set to sound every

hour on the hour with a single beep.

8. Illuminating light: The built-in electro-

luminescent (EL) light evenly illuminates the

display for easy viewing in darkness.

■

BUTTONS AND DISPLAYS

■

HOW TO SET THE TIME/CALENDAR

■

HOW TO USE STOPWATCH

The display mode changes in the following

order by pressing Button D.

1 Press Button A for 2 seconds to change the

display to the

TIME/CALENDAR SETTING mode.

(The second digits start flashing.)

2 Selection of the digits to be adjusted (flashing)

is made in the following order by pressing

Button D.

3 One digit (flashing) is increased or decreased

with each pressing of Button B or C,

respectively. To move the digits quickly, keep

the Button pressed.

• Second setting

Press Button B or C in accordance with a

time signal. The second digits are reset to

“00” and start counting immediately.

When the second digits count any number

from “30” to “59” and Button B or C is

pressed, one minute is added and the

seconds are immediately reset to “00.”

Choice of 12-Hour/24-Hour format

• The time display format in either 12-hour

indication or in 24-hour indication can be

selected alternately by pressing button B or

C. Under the 12-hour indication format, “PM”

mark appears in the afternoon, but no AM

mark appears in the morning. Under the 24-

hour indication format, no mark appears on

the display.

* Measurement and release of lap time can be

repeated by pressing Button C.

* When Button C is pressed, the display changes

to show the current lap time and total time from

START for 3 seconds, and then it automatically

returns to show the ongoing measurement.

* When the stopwatch is reset by pressing Button C,

the measured data is stored in memory.

Press Button D to go to the STOPWATCH mode.

The STOPWATCH mode indicator appears on the

display.

STOPWATCH OPERATION

Standard Measurement

Lap Time Measurement

Start

Lap 1

Reset

Lap 2

Stop

Start

Stop

Reset

NREZ010

5-2015

CAL. Z010 (R23 SERIES)

During the measurement, the STOPWATCH signal

keeps flashing.

Press Button D to return to the TIME/CALENDAR

mode.

1. Press Button D to go to the Memory Recall

mode. The MEMORY RECALL moce indicator

appears on the display.

Memory Recall Function

2. Press Button C to show the data of the latest

measurement. The elapsed time and the

date of measurement are displayed with a

RUN number.

3. Press Button B to read each recorded lap time.

Recorded lap time is shown in order of each

lap number.

4. Press Button C to exit the Memory Recall

Function. The display returns to the MEMORY

RECALL mode.

How to delete all of the memories

• Press Button A for 2 seconds. The “DELETE”

indicator appears on the display when the

watch starts deleting stored data. When the

deletion is finished, the display returns to the

MEMORY RECALL mode, and after 1 second, it

automatically goes to the STOPWATCH mode.

Data obtained in the Stopwatch mode can be

recalled after measurement. Each time data from

START to RESET is managed as a RUN. Press Button

D to return to the TIME/CALENDAR mode.

■

ENGAGEMENT/DISENGAGEMENT OF

CHIME

With each press of Button C in the TIME/CALENDAR

mode, the chime can be alternately engaged

or disengaged. The CHIME signal appears or

disappears on the display accordingly.

A (SET/LIGHT)

PM indi-

cator

Hour

Day of the week

Chime

signal

Stopwatch

signal

Date

Minute

Second

Timer signal

Alarm

signal

B (START/STOP)

D (MODE)

C (LAP/RESET)

4 After all the adjustments are completed, press

Button A to return to the TIME/CALENDAR

mode.

TIMER

TIME/CALENDAR

STOPWATCH

MEMORY RECALL

LOCAL CITY

SECONDS

DATE

12/24-HOUR FORMAT

MONTH

MINUTES

HOURS

LOCAL CITY

DATE SETTING

MONTH SETTING

TIME/CALENDAR mode

12/24 FORMAT SETTING

LOCAL CITY SETTING

MINUTE SETTING

HOUR SETTING

SECOND SETTING

STOPWATCH mode indicator

STOPWATCH signal

Local city

Month Year

DAILY ALARM

SINGLE-TIME ALARM

YEAR

YEAR SETTING

MEMORY RECALL moce indicator

After

1 second

LAP number

Total time from START

■

HOW TO USE COUNTDOWN TIMER

Press Button D three times to go to the TIMER

mode. The TIMER mode indicator appears on the

display.

1. Press Button A for 2 seconds to change the

display to the TIMER SETTING mode. The hour

digits start flashing.

2. Press Button B or C

to set the second

digits. One digit (flashing) is increased or

decreased with each pressing of Button B or C,

respectively. To move the digits quickly, keep

the Button pressed.

3. Press Button D to confirm the second setting

and move on to the minute setting. The minute

digits start flashing.

4. Press Button B or C to set the minute digits.

One digit (flashing) is increased or decreased

with each pressing of Button B or C,

respectively. To move the digits quickly, keep

the Button pressed.

5. Press Button D to confirm the minute setting

and move on to the hour setting. The hour

digits start flashing.

6. Press Button D to set the Timer number.

7. Press Button A to complete the timer setting.

LAP time

Summary of content (2 pages)

PAGE 1
5-2015 NREZ010 CAL. Z010 (R23 SERIES) ■ CHARACTERISTICS 1. Time/calendar display: Hour, minute, second, month, date and day of the week 2. Time indication: 12-hour display format with PM indicator and 24-hour display format are available. 3. S t o p wa t c h : The stopwatch can measure up to 23 hours 59 minutes and 59 seconds i n 1/100- s e c o n d i n c r e m e n t s . L a p t i m e measurement is available. Up to 15 lap times can be stored in memory.
PAGE 2
TIMER number B C C SECOND SETTING D A B C How to stop the alarm while sounding T h e a l a r m s o u n d s f o r 10 s e c o n d s a t t h e d e s i g n a t e d t i m e . To s t o p i t m a n u a l l y w h i l e sounding, press any Button. ■ HOW TO SET SECOND TIME ZONE Press Button D six times to go to the SECOND TIME ZONE mode. 1. Press Button C to select the city code. 2. If the daylight saving time is effective in the selected city, press Button B to show the daylight saving time.