User Manual

LOSB9501 Xcelorin Electronic Speed Control v1.0 Page 33
When using any Lithium or M1 (A123) batteries, they must not be discharged to less
than 3.0V per cell.
• No Cutoff The choice is not available and NOT recommended when using any
type of Lithium battery.
• Customize Voltage Cutoff (for Lithium Batteries) after selecting the number of cells
(2 or 3) the default voltage is displayed. For example, you select a 2S or 2-cell
battery; the default cutoff voltage will be 6.0V. You may raise this to protect your
expensive batteries in 0.1V increments up to 7.0V. For 3S or 3-cell, the default cutoff
is 9.0V and you may increase this up to 10.5V.
Brake/Reverse – This defaults to Forward with Reverse for crawler use and
cannot be changed.
Throttle Limit – Use this to limit the power available using forward throttle.
The lower the percent the less forward throttle speed will be available.
(Default)
•
0%
100% of forward speed
• 50%
50% of forward speed
•
10%
90% of forward speed
• 60%
40% of forward speed
•
20%
80% of forward speed
• 70%
30% of forward speed
•
30%
70% of forward speed
• 80%
20% of forward speed
•
40%
60% of forward speed
• 90%
10% of forward speed