User Manual

LOSB9501 Xcelorin Electronic Speed Control v1.0 Page 35
• Mid Medium requires more from your batteries, and is good for low traction
surfaces.
• High This option will provide full acceleration and requires stout batteries to
supply the load required in this setting.
Braking Percent – This option is disabled for crawler use.
Percent Drag Brake – The drag brake function provides the driver a set
percentage of brake when you have the transmitter resting in neutral. This will
hold a vehicle without a worm gear drive system stationary when on an incline.
For a vehicle with a worm gear drive system there is sufficient drag within the
driveline to hold the vehicle on an incline. Use 0% drag brake to minimize the
load on the ESC and motor when stopped. This will lower temperatures and
increase run time. If your vehicle has a conventional drive system, then choose
the appropriate amount of brake for your application. Too much will increase
temperatures and lower run time.
•
Worm Gear (Default) • 80%
•
50% • 90%
•
60% • 100%
•
70%