User Manual
30
NIGHT CRAWLER SE RTR: 1:10 4WD ROCK CRAWLER
30
NIGHT CRAWLER SE RTR: 1:10 4WD ROCK CRAWLER
REPLACEMENT PARTS // TEILELISTE // LISTE DES PIÈCES DE RECHANGE // ELENCO DEI RICAMBI
Part # English Deutsch Français Italiano
DYN3205 4 x 8 Unflanged Ball Bearing
4 x 8 flanschloses Kugellager Roulement à billes sans collet 4 x 8 4 x 8 cuscinetti a sfera senza flangia
DYNS1216 Dynamite 35T 540 Brushed Motor Dynamite 35T 540 Bürstenmotor Moteur à balais Dynamite 35T 540 Motore a spazzole Dynamite 35T 540
DYNS2210 WP 60A FWD/REV Brushed ESC WP 60A FWD/REV Bürstengeschwindigkeitsregler Variateur ESC à balais AV/AR WP 60A WP 60A FWD/REV Brushed ESC
LOS230005 LED Light Board and Housing LED-Leuchtplatine und Gehäuse Panneau et boîtier à DEL
Scheda luci LED e alloggiamento
LOS230047 Roll Cage Set Überrollkäfig-Set Ensemble de cage de retournement Set scocca di sicurezza
LOS230048 Accessory Pack Zubehörpaket Pack d’accessoires Pacchetto accessori
LOS230049 3-Way Splitter 3fach-Splitter Diviseur à trois voies Splitter a 3 vie
LOS230050 Body Set w/Drivers, Clear Karosseriesatz mit Fahrern, farblos
Ensemble carrosserie avec outils d’assemblage,
transparent
Set carrozzeria con piloti, trasparente
LOS231004 Side Plate Set, Chassis, Black Seitenplattensatz, Karosserie, Schwarz Ensemble de plaques latérales, châssis, noir Set lamiera laterale, telaio, nero
LOS233000 2.5" Spring 3.4 Rate, Black (4) 2,5" Feder 3,4 Federrate, Schwarz (4) Ressort de 2,5 po, raideur 3,4, noir (4) Molla 2,5", grado 3,4, nero (4)
LOS234001 1.2" Shock Body, Silver (4) 1,2" Dämpfer, Silber (4) Corps d’amortisseur de 1,2 po, argent (4) Corpo ammortizzatore 1,2", argento (4)
LOS235003 M3 x 6mm Cap Head Screws (10) M3 x 6mm Inbusschraube (10) Vis d’assemblage creuses M3 x 6 mm (10) Viti a testa tonda M3 x 6 (10)
LOS4120 48 Pitch Pinion Gear, 20T 48 Pitchzahnradgetriebe, 20T Engrenage à pignons pas 48, 20T Pignone 20T, pitch 48
LOSA1030 Spindle and Carrier Set Spindel- und Trägersatz Ensemble axe et support Set fuselli e portafuselli
LOSA1033 Upper Suspension Link Mount Obere Aufhängungsarm der Halterung Support pour bras de suspension supérieur Supporto braccetto sospensione superiore
LOSA1034 Lower Suspension Link, Mounts and Pin Obere Unterfederungsarm, Halterung und Stift Bras de suspension inférieur, supports et broche Supporti braccetto sospensione inferiori e perno
LOSA1517 Steering King Pins and Hardware Steuerung Königszapfen und Hardware Pivots de fusée et matériel King pin sterzo e bulloneria
LOSA2030 Rear Outer Hub, Cap and Hardware Heckaußennabe, Kappe und Hardware Moyeu extérieur arrière, cache et matériel Mozzo esterno posteriore, coperchio e bulloneria
LOSA3184 Rear Axle Hinterachse Essieu arrière Assale posteriore
LOSA3185 Rear Axle Spacer Set, Aluminium Hinterachse Distanzstücksatz, Aluminium Ensemble d’entretoises pour essieu arrière, alum. Set distanziale assale posteriore, alluminio
LOSA3187 HD Worm Gear Set, 21T (2) HD Schneckengetriebesatz, 21T (2) Engrenage à vis sans fin, ultra-résistant, 21T (2) Set vite senza fine HD, 21T (2)
LOSA3194 Front & Center CV Rebuild Kit Front & Mitte-CV Umbau Kit Kit de réparation homocinétique avant et centre Kit ricostruzione CV anteriore e posteriore
LOSA3196 Front CV Drive Shaft Set, HD Front CV Antriebswelle Satz, HD
Jeu d’arbres de transmission avant
homocinétiques, ultra-résistant
Set albero di trasmissione CV anteriore, HD
LOSA3197 Front CV Axle HD Front CV Achse HD Essieu avant homocinétique, ultra-résistant
Assale CV anteriore, HD
LOSA3198 Front CV Drive Shaft HD Front CV Antriebswelle, HD
Arbre de transmission homocinétique avant,
ultra-résistant
Albero di trasmissione CV anteriore, HD
LOSA3199 CV Pin Retainer Clip 11mm Pins CV Befestigungsklemme 11mm Pins
Bague de retenue avec axes homocinétiques,
axes de 11 mm
Morsetto di fermo perno CV, perni 11 mm
LOSA4009 Battery Straps, Hook/Loop (2) Akkuklemmen, Haken/Schlaufen (2) Sangles de batterie, velcro (2) Fascette a strappo batteria (2)
LOSA4012 Front/Rear Axle Case Set Front/Hinterachse-Gehäusesatz Jeu de carters d’essieu avant/arrière Set scatola assale anteriore/posteriore
LOSA4036 ESC Platform Geschwindigkeitsregler-Plattform Plateforme ESC Piattaforma ESC
LOSA4037 Servo Mnts, Plate and Hardware Servo-Halterung, Platte und Hardware Supports, plaque et matériel pour servo Supporti servo, piastra e bulloneria
LOSA4039 Transmission Skid Plate: CCR Getriebe Gleitbrett: CCR Plaque de protection pour transmission : CCR Piastra proteggi trasmissione: CCR
LOSA5012
Upper Shock Bushings and
Lower Shock Pivot Ball (4)
Obere Dämpferlager und untere
Dämpferschwenkkugel (4)
Bagues supérieures d’amortisseur et Rotule
inférieure d’amortisseur (4)
Boccole ammortizzatore superiori e articolazione
a rotula ammortizzatore inferiore (4)
LOSA5015 Double O-Ring Shock Cartridge Doppel-O-Ring Stoßdämpfer Cartouche d’amortisseur à double joint torique Doppio O-Ring cartucce ammortizzatore
LOSA5023 Shock Spring Clamps & Cups Stoßdämpfer-Federspanner & Federteller Brides et coupelles de ressort d’amortisseur Morsetti e coppe molle ammortizzatori
LOSA5062 Shock Shaft,1.2" Ti-Nitride Kolbenstange,1.2" Ti-Nitrid Arbre d’amortisseur, 1,2 po, nitrure de titane Stelo ammortizzatore, 1.2" Ti-Nitride
LOSA5079 Shock Ends and Cups (4) Stoßdämpferenden und Teller (4) Embouts et coupelles d'amortisseur (4) Terminali e coppe ammortizzatori (4)
LOSA6045 HD Steering Link Set HD Lenkgliedset Timonerie de direction, ultra-résistante Set braccetti sterzo HD
LOSA6100 1/8" E-Clips 1/8“ E-Klemmen Clips en e, 3 mm (1/8 po) E-Clip, 1/8"
LOSA6109 E-Clips, 5mm (12) E-Klemmen, 5mm (12) Clips en e, 5 mm (12) E-Clip, 5 mm (12)
LOSA6201 3mm x 6mm Socket Head Screw 3mm x 6mm Innensechskantschraube Vis à pans creux 3 mm x 6 mm Vite a brugola 3 x 6 mm
LOSA6206 4-40 x 3/8" Socket Head Screws (10) 4-40 x 3/8 Innensechskantschrauben (10) Vis à 6 pans creux 4-40 x 3/8 po (10) Viti a brugola 4-40 x 3/8" (10)
LOSA6210 4-40 x 3/8" Flat Head Socket 4-40 x 3/8 Flachkopfbuchse Vis à tête fraisée à 6 pans creux 4-40 x 3/8 po Vite a testa piatta 4-40 x 3/8"
LOSA6213 4-40 x 1/4" Flat Socket Screw (6) 4-40 x 1/4 Flachkopf-Zylinderschraube (6) Vis à tête fraisée à 6 pans creux 4-40 x 1/4 po (6) Viti a testa piatta 4-40 x 1/4" (6)
LOSA6221 4-40 x 5/8" Cap Screws (6) 4-40 x 5/8 Kopfschrauben (6) Vis d’assemblage 4-40 x 5/8 po (6) Viti a brugola 4-40 x 5/8" (6)
LOSA6228 5-40 x 1/8" Hardened Setscrews (10)
5-40 x 1/8 Gehärtete Feststellschrauben (10)
Vis de fixation en acier trempé 5-40 x 1/8 po (10) Viti di arresto indurite 5-40 x 1/8" (10)
LOSA6229 4-40 x 3/8" Button Head Screws 4-40 x 3/8 Rundkopfschrauben Vis à tête bombée 4-40 x 3/8 po Viti a testa tonda 4-40 x 3/8"
LOSA6245 4-40 x 5/16" Button Head Screws (10) 4-40 x 5/16 Rundkopfschrauben (10) Vis à tête bombée 4-40 x 5/16 po (10) Viti a testa tonda 4-40 x 5/16" (10)
LOSA6248 4-40 Setscrew Assortment (11) 4-40 Feststellschrauben-Set (11) Assortiment de vis de fixation 4-40 (11) Viti di arresto assortite 4-40 (11)
LOSA6256 4-40 x 1/2 Button Head Cap Screw (6) 4-40 x 1/2 Halbrundschraube (6) Vis d’assemblage à tête bombée 4-40 x 1/2 po (6) Vite a testa tonda 4-40 x 1/2 (6)
LOSA6258 2-56 x 5/16" Flathead Screws (24) 2-56 x 5/16 Flachkopfschrauben (24) Vis à tête plate 2-56 x 5/16 po (24) Viti a testa piatta 2-56 x 5/16" (24)
LOSA6269 4-40 x 5/16" Flathead Screw (6) 4-40 x 5/16 Flachkopfschraube (6) Vis à tête plate 4-40 x 5/16 po (6) Vite a testa piatta 4-40 x 5/16" (6)
LOSA6294 2-56 x 5/16" Cap Screw (6) 2-56 x 5/16 Kopfschraube (6) Vis d’assemblage 2-56 x 5/16 po (6) Vite a brugola 2-56 x 5/16" (6)
LOSA6306 4-40 Aluminum Mini-Nuts (10) 4-40 Aluminum Minimuttern (10) Mini-écrous en aluminium 4-40 (10) Mini dadi in alluminio 4-40 (10)
LOSA6308 4-40 Steel Locking 1/2 Nuts (10) 4-40 Stahlsicherung 1/2-Mutter (10) Demi-écrous de blocage en acier 4-40 (10)
Dadi autobloccanti 4-40 1/2" (10)
LOSA6350 #4 and 1/8" Hardened Washers #4 und 1/8 gehärtete Unterlegscheiben Rondelles en acier trempé no4 et 1/8 po Rondelle indurite #4 e 1/8"
LOSA6358 Shim Set Dichtscheibe-Satz Jeu de cales Set spessori