User's Manual

Guide to the SRX800 Receiver Preliminary
US I N G T H E I N P UT K E Y S
ENTER
Once a value is entered for an input, pressing the Enter key causes the receiver to
accept that input and save it, provided that the receiver is Online.
END/ESC
The END/ESC key is used for menu navigation, for cancelling incomplete
inputs, and for stopping receiver actions in Online mode.
For navigation, it provides the ability to return to the last menu accessed. For
example, after enabling TOA, press the END/ESC key to return to the Scan
Options menu (where the TOA feature was accessed).
The END/ESC key can also be used to cancel an input before it is entered
completely (e.g, while entering 148.08_). Many inputs are accepted automatically
as soon as the number receives the expected number of characters. If a number is
only partially entered and you decide to cancel that input, press the END/ESC
key to cancel it.
If the receiver is Online, the END/ESC key can also be used to stop a current
active state of the receiver (e.g. GPS position acquisition or a Scan Cycle). This
action is dependant on the status of the receiver. For example, if the receiver is
not trying to acquire a GPS position, then the END/ESC key has no effect. If the
receiver is Offline, then the END/ESC key has no effect.
NU M B E R S
Keys that have a number (0 through 9) in their lower portion are used in two
ways: to select menu items and to enter in numeric values.