User's Manual

Guide to the SRX800 Receiver Preliminary
The first entry is shown in the first line of the display. To view the next entry, use
the Right Arrow key to advance through the list. An entry in the list can be
deleted at any time by pressing the 1 key [1)Del].
RE J E C T I N G ID O N L Y
Use this feature to create a list of transmitter IDs that will be rejected during a
scan. All IDs added to this list are rejected (and all IDs that are not in the list are
accepted). Any detections with the specified ID in the list are not recorded by the
receiver or displayed (on the LCD display or in the SRX Host).
Add an ID to the reject list via:
Codelog > 1)Config > 5)Filters > 1)ID Filter > 4)Set Reject ID >1)Add
The number in brackets in the first line of the display corresponds to the entries
in the list (e.g. entry #33 in the reject list).
Any entry in the reject list can also be viewed and deleted. View an entry via:
Codelog > 1)Config > 5)Filters > 1)ID Filter > 4)Set Reject ID > 2)View/Del
The first entry is shown in the first line of the display. To view the next entry, use
the Right Arrow key to advance through the list. An entry in the list can be
deleted at any time by pressing the 1 key (1)Del).
AC C E P T I N G ID O N L Y
Use this feature to create a list of transmitter IDs that should be accepted during
a scan. All IDs added to this list are accepted (and all IDs that are not in the list
are rejected). Any detections with the specified ID in the list are recorded by the
receiver and displayed (in the LCD display and in the SRX Host).
Add an ID to the accept list via:
Codelog > 1)Config > 5)Filters > 1)ID Filter > 5)Set Accept ID >1)Add
The number in brackets in the first line of the display corresponds to the entries
in the list (e.g. entry #33 in the accept list).