Instructions / Assembly

13
INSTALLATION
PLEASE READ ENTIRE INSTALLATION SECTION BEFORE STARTING
INSTALLATION. BE SURE THAT ONLY QUALIFIED PERSONNEL SHOULD
PERFORM THIS INSTALLATION.
__________________________________________________________________
 BEFORE INSTALLATION
ELECTRIC SHOCK can be fatal
 Have a qualified electrician install and service this equipment.
 Turn the input power OFF and unplug the machine from the receptacle before working
on this equipment.
 Allow machine to sit for 5 minutes minimum to allow the power capacitors to discharge
before working inside this equipment.
 Do not touch electrically hot parts.
 Machine must be plugged into a receptacle that is grounded according to the National
Electrical Code and local codes.
 Do not remove or defeat the purpose of the power cord ground pin.
 ENVIRONMENTAL AREA
Keep the machine dry. Do not place it on wet ground or in puddles. Avoid rainwater. Operating in
rain is not allowed.
o SELECT SUITABLE LOCATION
The machine will operate in harsh environments. Even so, it is important that standard measures
are followed in order to assure the machine is long lasting and reliable operation.
 The machine must be located where there is open space such that the air circulation in the back
and out the front will not be restricted.
 Avoid getting dirt and dust in the machine. Failure to observe these precautions can result in
excessive operating temperatures and shutdown by itself.