Full Product Manual

18
5
NOZZLE POSITION ADJUSTMENT
Installation Manual and Operating Instructions
Nozzle position is adjustable to the desired position by pressing “( )” or
“( )”button. After use the nozzle will return to position 3.
DEODORIZER (ATS-1000L, R Only)
The deodorizer is activated when the unit is occupied. It automatically stops in about
1 minute after user leaves.
The deodorized air velocity can be adjusted to the desired level by holding
Level 1
OFF
Low
when occupied
Low
when occupied
High
when occupied
Low
when unoccupied
High
when unoccupied
High
when unoccupied
Level 2 Level 3 Level 4
+
(Level1~4)
OSCILLATE ( Nozzle Move )
OPERATION (DETAILED)
When using “WASH( ) ” or “LADY( )”, press the “OSCILLATE” button to get
oscillating spray for wider area cleansing. This function is not available during
“PURESTREAM”.
“STOP”( ) button down, and pressing “WATER”( ), simultaneously. (Without
occupying the seat)
OPERATION
1000
The oscillation can be adjusted to the desired position by pressing
“OSCILLATE” and “front ( )” or “back ( )”, simultaneously.
If you push “OSCILLATE” again, the oscillation will stop.
* Auto-Setting of Oscillation
: Without occupying the seat, press “OSCILLATE” button for 3 seconds to set up
“Automatic Oscillation”. The oscillation function will operate automatically when
“WASH” or “LADY” is pressed.
/ If you press “OSCILLATE” button for 3 seconds again,the Auto-Setting of
Oscillation will stop.
WATER
WATER