Operation Manual

18
ILMJS20/55
19
ENGLISH
By virtue of the regulations pursuant to the handling of waste products deriving
from electronic and electrical equipment, end of lifecycle watch making products
must be selectively collected for processing. You may therefore dispose of your
quartz watch making products at any of our retail outlets or any other authorized collection
point. The selective collection, processing, rating and recycling of these products helps
contribute to safeguarding the environment and protecting our health.
STOPWATCH RESET (incl. after replacing battery)
1. Pull the crown out to the 1st Click Position.
2. Press button “A” to set the stop watch second hand to the ZERO position.
*The stopwatch minute hand is syncronized with stopwatch second hand.
*The stop watch second hand can be advanced rapidly by continuously pressing button “A”.
3. Once the hands have been zeroed, reset the time and return the crown to its normal
position.
This procedure should be performed when the stopwatch second hand does not return to the
ZERO second position after the stopwatch has been reset, and including after the battery has
been replaced.