Operation Manual

Assembly
1.
Open the battery case at the bottom of the outer bowl
(6)
. Insert four AA batteries
(7)
. Mind polarity.
Close the battery case.
2. Place the inner bowl
(5)
into the outer bowl
(6)
.
3. Fill the charcoal container
(3)
completely with charcoal e. g. LotusGrill* Beech Charcoal*
Put cover on charcoal container
(2)
.
4. Apply a circular layer of lighter gel on ignition plate
(4)
, approx 10 mm (0.4 inches) wide.
Place ignition plate
(4)
into inner bowl
(5)
. We recommend the LotusGrill* Safety Fuel Gel.
5. Turn the round ventilation control button on outer bowl
(6)
on.
Turn it clockwise to maximum position.
In order not to quench the flame, the ventilation needs to be
turned on.
Do not touch the flame!
6. Light gel until it burns.
7. Put the cover
(2)
on the filled charcoal container
(3)
and place container on ignition
plate
(4)
. Within a short period of time, the charcoal will be glowing.
Place the charcoal container carefully and evenly on the ignition plate!
8. Put the grill grid
(1)
on top of the inner bowl
(5)
. Make sure to insert the four metal legs into the
slots of the inner bowl
(5)
. Both metal loops at the side of the grill grid
(1)
have to be aligned with
the latches.
9. Hook the latches into the metal loops, and pull down to lock the device. The grill is now a
connected and compact unit.
10. After approx. 3-4 minutes, LotusGrill is ready for use. Use the On/Off Switch for heat
regulation
(8)
to regulate heat. The fan stays on during the entire barbecue session.
Assembly and Operation Instructions
English 13
IMPORTANT
* Every common type of charcoal can be used. Briquettes do not deliver optimal results.
CAUTION
CAUTION
ENG