Instructions / Assembly

www.louisiana-grills.com
5
ENGLISH
ENGLISH
E
2x
C
D
2x 2x
E
C
D
6.ATTACHING THE LID HANDLE
1x Lid Handle (#10)
2x Lid Handle Bezel (#9)
2x
1/4-20x3/4"
Screw (#E)
2x
1/4
washer
(#C)
2x
1/4
spring washer
(#D)
From inside the barrel lid, insert one screw so that it protrudes to the outside.
Add a bezel on the screw, then hand-tighten the screw (from the inside) into
7.POSITIONING THE BURN GRATE
1x Burn Grate (#11)
Proper placement and maintenance of the burn grate is vital to the use of the unit. Insert the
burn grate into the burn pot. The hole in the burn grate should align and be open for the igniter
to light the pellets. To verify proper positioning, ensure the curved lip of the burn grate is flush
with the top of the burn pot, and the notched side should sit flush, under the fuel deflector.
7.POSITIONING THE BURN GRATE
1x Burn Grate (#11)
Proper placement and maintenance of the burn grate is vital to the use of the unit. Insert the
burn grate into the burn pot. The hole in the burn grate should align and be open for the igniter
to light the pellets. To verify proper positioning, ensure the curved lip of the burn grate is flush
with the top of the burn pot, and the notched side should sit flush, under the fuel deflector.
6
2x
B
B
5.INSTALLING THE FRONT SHELF BRACKETS
1x Front Shelf (#8)
2x Screw (#B)
From underneath, insert the screw (from the outside) into the front shelf bracket and the front
shelf.
Repeat the installation for the other side of the front shelf.
2x
B
B
5.INSTALLING THE FRONT SHELF BRACKETS
1x Front Shelf (#8)
2x Screw (#B)
From underneath, insert the screw (from the outside) into the front shelf bracket and the front
shelf.
Repeat the installation for the other side of the front shelf.
INSTALLING THE FRONT SHELF
PARTS REQUIRED:
1 x Front Shelf (#14)
2 x Screw (#B)
INSTALLATION:
• From underneath, insert the Screw (from the inside) to fasten the Front Shelf
Brackets and the Front Shelf together. Note illustration 5A.
• When the Front Shelf is not in use, it can be lowered. Note illustration 5B.
INSTALLING THE LID HANDLE
PARTS REQUIRED:
2 x Lid Handle Bezel (#12)
1 x Lid Handle (#13)
2 x Washer (#C)
2 x Locking Washer (#D)
2 x Screw (#E)
INSTALLATION:
• Take one screw, add a locking washer and a washer, then from inside the Main
Barrel lid, protrude the screw to the outside. Add a bezel on the screw, then
hand-tighten the screw (from the inside) into the Lid Handle.
NOTE: DO NOT OVER-TIGHTEN THE SCREWS. ONLY A SNUG FIT IS NECESSARY.
• Repeat the same installation for the other end of the Lid Handle.
INSTALLING THE BURN GRATE
PARTS REQUIRED:
1 x Burn Grate (#6)
INSTALLATION:
• Insert the burn grate into the burn pot. The hole in the burn grate should align
and be open for the igniter to light the pellets. To verify proper positioning,
ensure the curved lip of the burn grate is ush with the top of the burn pot, and
the notched side should be ush under the fuel deector.
IMPORTANT: PROPER PLACEMENT AND MAINTENANCE OF THE BURN GRATE IS
VITAL TO THE USE OF THE UNIT.
5
B
7
A
7
B
5
A
6
12
12
13
14