Installation Manual

MICROPHONE SENSITIVITY SWITCH
The microphone pre-amp (PC board) contains a sensitivity
switch with two positions marked N and L, and is located on the
back side of the Model USB near the terminal block:
N represents normal sensitivity
(0 dB @ 1,000 )
L represents lower sensitivity
(-6 dB @ 1,000 )
Microphone is always shipped in the L position. For higher
microphone sensitivity, move slide switch to N position.
W
W
INSTALLATION AND OPERATING INSTRUCTIONS
Page 3 of 3
LOUROE ELECTRONICS 6955 VALJEAN AVENUE, VAN NUYS, CA 91406 TEL [phone] FAX [phone]
website: www.louroe.com e-mail: [e-mail]
(818)
®
USB_mic-inst_03/17
N
L
Verifact A USB Microphone
USB connects to computer, NVR, or
other audio interfaces.