Installation Manual

Page 4 of 4
LOUROE ELECTRONICS® 6955 VALJEAN AVENUE, VAN NUYS, CA 91406 TEL [phone] FAX [phone]
website: www.louroe.com e-mail: [e-mail]
(818)
INSTALLATION AND OPERATING INSTRUCTIONS
IMPORTANT NOTICE
When this equipment is used as part of an audio
monitoring system, the law requires that the public be
given notice of AUDIO MONITORING ON THE
PREMISES. A decal notice is included with each
microphone shipped.
Federal Law References:
Federal Regulations, US Code, Title 18. Crime and
Criminal Procedure, Sec 2510.
AUDIO
MONITORING
On
These Premises
®
aop530_540_inst 11/17
SPECIFICATIONS (Microphone)
Audio output
Microphone element sensitivity
Line level (0 dB @ 600W)
unbalanced
-45 dB
Frequency response
Audio Input Impedance
40 Hz - 15 kHz
600W
Electret Condenser
Type
SPECIFICATIONS (Speaker)
Speaker power output
Speaker impedance
Speaker magnet
Speaker size
1W
8W
Neodymium
2”
Current Drain
Supply Voltage
Dimensions
Weight
Shipping Weight
200mA
12Vdc
6.5” H x 4.8” W x 1.9” D
1lb 7 oz
3 lbs
WARRANTY
LOUROE ELECTRONICS® warrants that at the time of shipment products manufactured by LOUROE ELECTRONICS® to be free of defects in material and workmanship.
Should a defect appear within one year (24 months) from date of shipment, LOUROE ELECTRONICS® will, at its sole discretion, repair or replace the defective equipment.
This equipment shall not be accepted for repair or return without prior notification by LOUROE ELECTRONICS®.
This warranty does not extend to any Louroe product that has been subjected to improper or incorrect installation, misuse, accident, or in violation of installation
instructions provided by LOUROE ELECTRONICS®.
Returned shipments to LOUROE ELECTRONICS® shall be at customer’s expense. LOUROE ELECTRONICS® will return the equipment prepaid via best way.