Owner manual
Place the rear bracket behind the dip in the
trim panel. Then repeat on the other side.
Close the top cover lid to hold the black
hooks in place.
Pull the wire bracket back and forward, then
lower it to line up with the space beside the
seat belt.
The wire hook when pulled out, will rest on
the trim panel just above the seat belt near
the front seats.
If you have any questions or comments please
call 1-855-457-5683 or email information@lovethedrive.com
www.lovethedrive.com
Repeat on the other side and you are ready
to Love The Drive.
Direct the wire bracket into the space
behind the seat belt.