Operating Instruction

GRATING SPECTROPHOTOMETER OPERATING MANUAL
9
Figure 11 Reflectance of Standard Measurement
Detail instructions of standard measurement are as following:
1) Interface Title: Indicating it is under interface of standard
measurement.
2) Condition area: display system setting such as the current serial
number, lighting source, UV (on/off), Bluetooth (on/off), measurement
mode (I+E mode could not be used under standard measurement), and the
current time, date and power etc. Only when turn on Bluetooth or UV
function, they will be highlighted.
3) Camera Locating: Click to use the camera to position the measurement,
then press “Testing” button to complete measurement.
4) Serial number of standard: It is generated by the system automatically,
and started from T0001 to T1000.
5) Standard Name: Display the current measurement standard name, and
click it to quickly modify, or the default is No name.
6) Display mode: Click
to switch or click to switch
Note: The switchable of SCI or SCE model is only to display the current
data, and the sample measurement mode “SCI/SCE/I+E” is required to
switch in the system setting (Chart 3.8.5). Standard measurement model
is fixed with I+E.