Operating Instruction

GRATING SPECTROPHOTOMETER OPERATING MANUAL
39
Figure 50 Time & Date
1) Click “Set Time” to set the current time.
2) Click “Set Date” to set the current date.
3) Click “Time Format” to set the required time format.
4)
Click “Date Format” to set the required date format. There are three
options: “Year Month Day”/ “Month Day Year”/Day Month Year”.
3.8.10 Backlight Time
Click “Backlight Time” in “Settings”. It could set the backlight time
according to the requirement.
Backlight time includes: "normally open", "5 minutes", "60 seconds", "30
seconds", "15 seconds". If selecting normally open, it will work until the
power is off to automatically shut down.
If selecting "60 seconds", it will work from the last operation. After 3
minutes, it will automatically enter soft power-off into power saving
mode. "5 minutes", "30 seconds", "15 Seconds"is the same as above.
5) options: “Year Month Day”/ “Month Day Year”/Day Month Year”.