Operating Instruction

GRATING SPECTROPHOTOMETER OPERATING MANUAL
40
3.8.11System Tolerance
Click “System Tolerance” to control all tolerance and default setting is
system tolerance.
3.8.12 Screen Brightness
Click “Screen Brightness” in “Settings”. It could adjust the brightness
by “+” and “-”.
3.8.13 Restore Factory Settings
Click “Restore Factory Setting” in “Settings” as shown in Figure 51.
Click , the instrument will restore factory settings and all records will
be cleared, while click to cancel this operation.
Note: Restore factory setting will delete all test data and settings. All are
irrecoverable so please operate it carefully.
Figure 51 Restore Factory Setting
4. Daily Maintenance
1) The instrument is a precision optical instrument. Please keep it and