Operating Instruction

GRATING SPECTROPHOTOMETER OPERATING MANUAL
6
the measuring aperture on white board and press “Testing” button for
white calibration, or click to cancel and quit the calibration.
After white calibration, it will prompt you to black calibration as shown
in Figure 6. According to warning, put the measuring aperture on black
board and press “Testing” button for black calibration, or click to
cancel and quit the calibration.
Figure 6 Black Calibration
After black calibration finished, it will automatically enter the main menu,
follow the menu to do correspond operations, and click back to
“Standard Measurement”.
2.3 Measurement
2.3.1 Measurement Instruction
As shown in Figure 7, 8, 9, it is working condition area at the top of
measurement interface, displaying the status of measurement mode
(SCI/SCE), Bluetooth and UV conditions. At the left side, it is shortcut
display, it could switch different modes by pressing different icons. At the
middle, it displays different chromatic data according to different setting
of color formula. It is operation buttons area at the bottom, which could
operate the data by pressing the different buttons.