40" CENTURY STAND / 40" GRIP ARM / 2.
Thank you for choosing Lowel. Lowel’s 40-inch C-Stand is one of the photo, video, and TV industries' standard go-to accessories in studio or on location. The 40-inch double-riser shaft is outfitted with ergonomic locking tri-knobs that offer a firm grip and secure hold. Staggered leg height design allows nesting several stands close together. Lowel C-stands are standard sized to perfectly fit on grip trucks or C-stand hangers.
Precautions • Please read and follow these instructions, and keep this manual in a safe place. • Make sure that this product is intact and that there are no missing parts. • Do not exceed the maximum load capacity. • Use caution when operating this product with the maximum load capacity. • Make sure all connections are secure before proceeding. • Always use sandbags. • Be careful not to catch or pinch your fingers when lowering riser sections. • Make sure the load is balanced.
Turtle Base C-Stand Setting Up the Legs 1. H old the C-stand so the center shaft is resting over your right shoulder, and the feet are pointing down. 2. H old the top leg with your left hand, and rotate the bottom leg with your right hand 1/3 turn counterclockwise until it locks into place. 3. W hile still holding the top leg in place with your left hand, turn the middle leg 1/3 turn counterclockwise until it locks into place. The bottom leg will rotate with it and lock into place. 4.
Sliding Leg C-Stand Setting up the Legs Before opening the legs, make sure there are no gaps between the leg collars. 1. H old the C-stand so the center shaft is resting over your left shoulder, and the feet are pointing down. Loosen the locking knob. 2. H old the shaft with your left hand, and rotate the top leg with your right hand 1/3 turn counterclockwise until it starts to pull the middle leg with it. 3. C ontinue to turn the top leg counterclockwise.
Grip Head and Grip Arm Attaching the Grip Head Loosen the locking tri-knob counterclockwise and place the grip head’s baby receiver over the baby pin. Then tighten the locking handle until secure. Attaching the Grip Arm With the T-handle facing you, loosen the grip head’s T-handle, and insert the grip arm into the 5/8 in. hole from the right. Turn T-handle clockwise, and tighten until secure. Important! Make sure the T-handle faces you, and the load is on the right side of the T-handle.
Specifications C-STAND GRIP HEAD LOAD CAPACITY 22 lb. (10 kg) MOUNTING OPTIONS 5/8 in. stud MAXIMUM WORKING HEIGHT CTB: 118 in. (299.7 cm) CSL: 127 in. (322.4 cm) MINIMUM WORKING HEIGHT 53.5 in. (136 cm) COLLAPSED HEIGHT 53.5 in. (136 cm) FOOTPRINT DIAMETER 37 in. (94 cm) ARM LENGTH 40 in. (101.6 cm) DETACHABLE BASE Yes (CTB models only) LEVELING LEG Yes (CSL models only) FINISH Matte black, Chrome CONSTRUCTION MATERIAL Aluminum, Steel WEIGHT Turtle Base: 12.8 lb. (5.
One-Year Limited Warranty Lowel-Light Manufacturing, Inc. ("Lowel") warrants this product to the original purchaser, under normal use, in accordance with operating instructions, will perform to the specifications published by Lowel at the time of purchase, for a period of one year from the date of purchase by the consumer.