User's Manual

6
Attaching the Grip Head
Attaching the Grip Arm
Loosen the locking tri-knob
counterclockwise and place the grip head’s
baby receiver over the baby pin. Then tighten
the locking handle until secure.
With the T-handle facing you, loosen the grip
head’s T-handle, and insert the grip arm into
the 5/8 in. hole from the right. Turn T-handle
clockwise, and tighten until secure.
Important! Make sure the T-handle faces
you, and the load is on the right side of the
T-handle. This will prevent the T-handle from
accidentally loosening.
Grip Head and Grip Arm