User Manual

| 15
StructureScan Troubleshooting Tips
StructureScan not
displayed
• Make sure StructureScan HD is pow-
ered
• Check unit software; must have at least
version 2.5
• Make sure yellow wire is connected to
switched power source
• Check fuse
No Data Check range or turn on auto range
Data washed out/
same color
Turn down contrast; try different palettes
Left/right data
swapped on screen
Toggle the Flip Left/Right feature
No Source is
displayed
• Make sure HDS unit and StructureScan
are powered and connected to ether-
net network
• Make sure all switches are powered
• Check link/active light to see which
units are not communicating