User Manual

| 7
StructureScan HD | Installation
Transducer angle
After mounting the StructureScan transducer, make sure the
transducer is adjusted so it will be parallel with the waterline when
moving at trolling speed.
Downscan Overlay
The StructureScan transducer should be installed within approxi-
mately 1 foot of the broadband sounder transducer to get optimum
performance from the Downscan Overlay feature.
It is recommended you turn off Downscan Overlay when using
your trolling motor as the sonar source, unless the StructureScan
transducer and broadband sounder transducer both are installed on
the trolling motor.
Downscan overlay performance could be degraded if the Struc-
tureScan transducer is too far away from the broadband sounder
transducer installed on the trolling motor.
< 0.3m (1ft)


