Instructions

* Optional chart items. You turn the optional chart items on/off

individually from the Chart settings dialog.

Chart data

The system is delivered with different embedded cartography

depending on region.

All units support Insight charts from Navico including Insight

Genesis. The system also supports charts from Navionics and

Jeppesen as well as content created by a variety of third party

mapping providers in the AT5 format. For a full selection of available

charts, visit gofreeshop.com, c-map.jeppesen.com, or

navionics.com.

Note: In this manual, all possible chart menu options are

described. These options vary depending on the chart you

are using.

Note: The system does not automatically switch to

embedded cartography if the chart card is removed. A low-

resolution chart will be displayed until you re-insert the

card or manually switch back to the embedded

cartography.

Selecting chart type

You specify the chart type in the Chart panel by selecting one of the

available chart types in the chart source menu option.

Vessel symbol

When the system has a valid GPS position lock, the vessel symbol

indicates vessel position. If no GPS position is available, the vessel

symbol includes a question mark.

Note: Without a heading sensor on the network, the vessel

icon orientates itself using COG (Course over Ground).

Chart scale

You zoom in and out on the chart by using the zoom (+ or -)

buttons or the + and - keys.

Charts | ELITE Ti Operator Manual