Instructions

Creating routes

You can create routes as follows on the chart panel.

1. Position the cursor on the chart panel

2. Select New followed by New route in the menu

3. Continue positioning the remaining routepoints

4. Save the route by selecting the save option in the menu.

Note: For more information, refer to "Waypoints, Routes, and

Trails" on page 47.

Find objects on chart panels

You can search for other vessels or various chart items from a chart

panel.

Activate the cursor on the panel to search from the cursor position.

If the cursor is not active, the system searches for items from the

vessel's position.

Note: You must have an AIS receiver connected to search

for vessels.

3D charts

The 3D option provides a three dimensional graphical view of land

and sea contours.

Note: All chart types work in 3D mode, but without 3D

cartography for the appropriate area the chart appears flat.

When the 3D chart option is selected, the Pan and the Rotate icons

appear on the chart panel.

Charts | ELITE Ti Operator Manual