Instructions

assigned in the Device Name setting. If the unit does not
appear, follow the on screen instructions to manually find the
device.
5. Select the graphic icon of the unit. The unit displays a prompt
similar to the following:
6. Select Yes for one-time connection, or Always if device is to be
remembered for regular connection. This setting can be
changed later if required.
Ú
Note: The internal wireless module only supports GoFree
connection to itself. Other units connected on the network
are not visible.
Remote controllers
When a wireless device is connected, it should appear in the
Remote controllers list.
Selecting Always allow means the device can automatically
connect without needing a password each time. This menu also
allows disconnection of devices that no longer require access.
Wireless device
This page shows the internal wireless module and its IP and channel
number.
42
Software Setup | ELITE Ti Installation Manual