Instructions

DHCP Probe
The wireless module contains a DHCP server that allocates IP
addresses for all the MFDs, and Sonar in a network. If integrating
with other devices, such as a 3G modem or satellite phone, other
devices in the network may also be acting as DHCP servers. To make
it easy to find all DHCP servers on a network, dhcp_probe may be
run from the ELITE Ti. Only one DHCP device may be operational on
the same network at a time. If a second device is found, turn off its
DHCP feature if possible. Refer to the device’s own instructions for
further assistance.
Ú
Note: Iperf and DHCP Probe are tools provided for
diagnostic purposes by users familiar with network
terminology and configuration. Navico is not the original
developer of these tools, and cannot provide support
related to their use.
Bluetooth wireless technology
The unit includes built-in Bluetooth wireless technology. To connect
the unit to Bluetooth enabled devices you must pair them. For more
information about Bluetooth and connecting devices, refer to the
unit's Operator manual.
NMEA 2000 setup
NMEA 2000 networking is available with the ELITE-7Ti only.
44
Software Setup | ELITE Ti Installation Manual