Endura™ GPS Sierra, Safari & Out&Back Operations Guide Operation Manual for Sierra, Safari and Out&Back
Copyright © 2009 Navico All Right Reserved. No part of this manual may be copied, reproduced, republished, transmitted or distributed for any purpose, without prior written consent of Lowrance. Endura™ is a trademark and Lowrance ® and Navico ® are registered trademarks of Navico, Inc. Accuterra® is a registered trademark and NEXTMAP ® is a registered trademark of Intermap Technologies Corporation. Mapping Database, copyright © 2009 NAVTEQ. NAVTEQ ON BOARD is a trademark of NAVTEQ.
Contents Table of Contents Basic Operation................................ 2 Trip Computer................................................9 Adjusting the backlight: ..................................2 Restore Defaults..............................................3 Touchscreen vs. Arrow/Mark keys...................3 Working with Menus........................................3 Page Settings/Data Fields...............................4 Installing batteries...........................................
Basic Operation Turning on Endura Titlebar The titlebar is located at the top of the screen. It displays battery strength and satellite reception indicators. Hold down the power key for three seconds to turn on Endura. The first time Endura is turned on, the select Language screen will appear. Touch the desired language. Turning off Endura Satellite reception Battery strength Cursor Selects objects on the Map page and pans the map when using arrow keys.
Basic Operation Restore Defaults Resets all device settings to factory defaults. To Restore defaults: 1. Touch Settings on the Main menu. Adjusting Features/Settings Toggle 2. S elect Restore Defaults. A confirmation message will appear. To adjust: Touch option field until desired setting is shown Submenu(s) appear when feature/setting field is touched 3. Touch Yes. Touchscreen vs.
Basic Operation Touch to display numeric keypad Alpha keypad Powering the Endura Backspace/delete Endura uses two AA batteries. It can also be powered with the mini-USB cable (not included with Out&Back). Numeric keypad Entering text/numerical values Touch desired characters. Entering text Touch Done tab when entry is & numbers completed. Installing batteries 1. T urn the battery cover D-ring counterclockwise, one-quarter turn.
Basic Operation GPX user files (trails, routes and waypoints) are loaded onto Endura’s internal memory using the mini-USB cable. Accessory map files are stored on microSD cards (sold separately). Audio (MP3 or WMA), video (MPEG, AVI or WMV) and picture (JPEG or BMP) files can be stored internally or on microSD cards. (Audio and video files can not be used on Out&Back). Installing battery cover 1. S lide the cover at a slight angle to insert tabs into slots at the bottom of battery compartment.
Pages The Safari and Sierra display Map, Satellite, Trip Computer, Elevation, Navigation and Compass pages. Elevation and Compass pages are displayed optionally on the Out&Back. See Settings in the Main Menu section for information on adding/removing pages. Data field Map Page Zoom In Latitude/Longitude Zoom Out Cursor Navigating a trail Current position Map options menu On the Map Page you can: Map Scale Return to previous screen • Drag your finger across the screen to move the map.
Pages Map Options menu Map display mode, orientation, detail and page display settings are adjusted from the Map Options menu. Touch the Options tab on the Map page to access the Map Options menu. Display Mode Basemap displays points, roads, water features, etc. Imagery displays satellite images, hillshade, etc.
Pages Satellite Page Latitude/Longitude Satellite location from horizon to overhead Fix type: 2D, 3D or WAAS Elevation, Estimated Accuracy & Position Dilution of Precision Satellite signal strength; green bars are being used to determine position; gray bars are being tracked, but not used Touch screen to view GPS settings Using the Satellite Page Access the GPS Settings menu, check satellite signal strength and position accuracy.
Pages Trip Computer Touch a data field to access Trip Computer menu Data Fields Trip Computer menu Data Fields Using the Trip Computer page Use the Trip Computer menu to display desired trip information and then monitor it all in one place.
Pages Current or cursor elevation Elevation Zoom in Zoom out Elevation scale Cursor — touch/drag to move Current position Return to previous screen Using the Elevation Page View elevation history based on time or distance.
Pages Nav Status Page Destination When no destination is set, page states “Not Navigating” Navigation arrow shows bearing to destination Compass rose; top indicates current heading Distance traveled Distance remaining to destination Touch screen to open Nav Status menu. Using Nav Status Page Nav Settings Nav Status menu changes per navigation scenario: trail, route, geocache or waypoint Let the green arrow guide you to your destination or the next point in your trail or route.
Pages Compass Page Data fields Bearing to destination Current heading Compass Rose Data fields Compass options menu appears when screen is touched Calibration screen Using the Compass Page Align the green arrow with the dark arrow to navigate to your destination or the next point in a trail or route.
Main Menu: Map/Find Map Main menu Press the Menu key to access the Main menu, touch Map to view the Map page. Find Used to search for items like waypoints, geocaches, points of interest, routes and trails and provides access to Goto/Navigation commands. Favorites A list of your commonly used waypoints, geocaches, trails, points of interest, addresses and routes.
Main Menu: Find Adding items to Favorites 1. Select the desired item (waypoint, route, etc.) from the Find menu. 2. T ouch the More Options tab and touch Add to Favorites. (You may have to navigate through an internal menu before the More Options tab will be visible.) Waypoints Used to create, delete, edit/customize, categorize and navigate to waypoints. To save a waypoint, hold down the Mark key for three seconds or select New Waypoint from the waypoint list. To access waypoint functions: 1.
Main Menu: Find View waypoint location on map Navigating to waypoint Input waypoint name Input Latitude/Longitude Select category; choose icon Input Elevation Waypoint Edit Screen Input description Return to previous screen Add to Favorites 15 Record a voice note
Main Menu: Find Geocaches Used to view, customize and navigate to geocaches. Geocaches can be uploaded onto Endura from geocaching web sites. To upload Geocaches: 1. Plug the mini USB cable into the Endura and your computer. It will be shown as a mass storage device on your computer. 2. Copy and paste the geocaching GPX file from its location to the GPX folder on Endura.
Main Menu: Find Trails Used to create, delete or navigate (forward or reverse) trails. GPX trails can be previously save trails from Endura or trails downloaded from community websites.
Main Menu: Find Points of interest Gives you access to a places database for restaurants, lodging, tourist sites, etc. Address Used to search for addresses and street intersections. Find menu POI Categories Subcategories for Food and Drink NOTE: Address function is available on Sierra and optionally on Safari with accessory mapping cards.
Main Menu: Find Routes Allows you to create, delete, edit and navigate (forward or reverse) routes. Waypoints, Geocaches, Points of Interest and Addresses can be used in route creation. Additional route points can be added from the map.
Main Menu: Find/Tools Navigating a Route Select Route from Routes List Touch Forward or Reverse Touch Navigate tab Map appears with route highlighted Tools Provides access to applications used to listen to music, view pictures and videos. The MP3 and video player are not available on Out&Back.
Main Menu: Tools Uploading files to Endura GPX Files Trails, routes and geocaches Accessory Outdoor, marine or mapping files turn-by-turn mapping Music MP3 and WMA Video MPEG, AVI and WMV Picture JPEG and BMP Use mini-USB cable to copy/paste files onto “Endura” directory on your computer Contained on microSD cards (sold separately) or downloaded from mapselect.com Music, video and picture files can be uploaded to Endura via the mini-USB cable (internal memory) or a microSD card To upload files: 1.
Main Menu: Settings Settings menu Volume Trail Logging Move slider bar to adjust volume level or touch mute tab Enable/disable trail logging, change trail logging mode (time or distance) and select logging interval Adjust Navigation Mode, Mode of Transport, Routing Efficiency, Regional & Navigation Ferries, Highways/Motorways/Toll Time Roads Select Time Zone, Daylight Savings, Time Display format, Language and Region Power Saving Controls Backlight Timeout, Power Saving Mode, Power Saving Timeout and
Main Menu: Nav Options Nav Options Allows you to access the Endura’s navigation information from one location. Nav Options can only be accessed while you are navigating. The submenu is context sensitive, depending on navigation target.: trail, route, waypoint or geocache.
Specifications Dimensions Feature 5.1” x 2.3” Wx 1.2” D (130mm x 60mm x 31mm) Preloaded Maps Weight Topo Contour Interval (feet) 5.8oz (165g) without batteries Sierra Safari Out&Back Premium Advanced Basic 100 500 — P P P Add on Maps Display Color, 2.7” (6.
*988-0161-54A* www.lowrance.
