User Guide
PLO111NG WITH A
WAYPOINT
Using
the
plotterwith
a recalled
waypoint
or
route is an
easy
way
Lu ee [he eeuw u wind
and
current
on
your
boat. It
also
simplifies navigation.
To
use
the
plotter
in
this
manner,
first recall a
waypoint
or start a
route.
(See
the
Waypoint
Re-
call section for more
informa-
tion.)
Then
press
the PLOTTER
key.
A screen similar to the one above
appears.
The'S" is
your starting
location. This was
your position
when
you
recalled
the
waypoint.
The
flashing
circle with a cross is
your present position.
The
"flag"
with a number inside is the destination
(recalled waypoint).
The
number inside the
flag
is the recalled
waypoint
number. In this
example,
waypoint
number 10 is the destination. The dotted line is the
shortest,
most direct course from the
starting point
to the destination. Follow this
line to
get
to the
waypoint.
The arrival alarm is
automatically
set to sound a tone when
you
come
within a
preset
distancetothe
destination when
you
recall a
waypoint.
See
the section on alarms for more
information about the arrival alarm.
PLOTTER MENUS
Pressing
the MENU
key
while the
plotter displays gives you
a new set of
menus that relate
onlyto
the
plotter.
There are two
pages
of
plotter
menus.
PLOTtER MENU
-
PAGE 1
CLEAR PLOT
To clear or erase the solid track
line
from the
screen,
use the
"Clear Plot "menu selection.
The
plotterwill
continueto draw
your
track after this
key
is
pressed, starting
from
your
present position.
VIEWING WINDOWS
OPTIONS
To see all
of
the available
win-
dow
options, press
the WIN-
DOWS
key,
then
press
the
IVItINU
Key.
INUW
press
me
Key
adjacent
to the
"MAIN MENU"
label.
Finally,
pressthe
key
next
to
the "VIEW ALL WINDOWS"
label. The screen at
right ap-
pears.
"eu
N
U
(—'e
S
E
S 0.511
PLOTTER
You
ma
zet
any
Plotter
Parameters
indepeHdent 19
from the
Menu.
The first window
appears
in the
upper right
corner of the screen. A
description
of the screen shows in the
box at the bottom of the screen. Now
press
the
key adjacent
to the "Next"
label. This
changes
the
displayed
window and
description.
When
you've
finished
viewing
the
windows, press
the CLR
key.
MODIFYING GROUPS
To
modify
or "customize" a
group,
first
press
the WIN-
DOWS
key,
then
press
the
MENU
key.
Now
press
the
key
adjacent
to the
"MAIN MENU"
label at the bottom of the
screen. The screen shown at
right appears.
Now
press
the
key adjacent
to
the "RE-PROGRAM A
GROUP" label. The screen shown below
Select the letter of the
group
you
wish to customize
by
pressing
the
key adjacent
to
the
group's
label. If the label
isn'tshownonthis
page, press
the
key adjacent
to the
"MORE" label.
Inthisexample,
the
key
next to the "GROUP
A" label was
pressed.
The
screen shown atthe
top
of the
next
page appears.
appears.
20
29
PDF compression, OCR, web-optimization with CVISION's PdfCompressor