User Guide

Press the
up
arrow
key
to
move backward. For
example,
pressing
the down arrow
key
once
shows the
group
"B"
screen . To exit the windows
mode, press
the
GPS,
PLOT-
TER,
or STEER
keys.
To use the windows
feature,
first
press
the WINDOWS
key.
A screen similar to the one
shown at left
appears.
The
menu
on the
right
side of the
screen lets
you
switch between
the
"pages"
of
displays.
These
are lettered
"A"
through
"I".
Group
"A" shows first. Press
the down arrow
key
to move
forward
through
the screens.
Every
one of the
group
screens
can be modified to some extent. For
example, press
the MENU
key
while
group
"A" is
displayed.
Four new
labels
appear
on the
display
as
shown above. Two of these labels are
window menus.
Pressing
the
key adjacent
to one
of the "window menu"
labels
givesyou
a menu with functions that relate
only
to that
window. For
example,
if
you press
the
key adjacent
to the
plotter
menu label on the
plotter
window,
the screen will
clear and
you
will have
a new
menu with
selections such as
"Clear Plot" and
"Set
Range".
This isthe
normal
plotter
menu
screen.
To exit from a window
menu,
press
the CLR
key.
SET RANGE
Use the "Set
Range"
menu
to
change
the
plotter's range
or
distance across the
plotter's
display.
The
range
is 1
statute
mile when the GlobalNav II is
turned
on for the first time. The
available
plotter ranges
are
.1,
.2, .5, 1, 2, 5, 10, 20,
50,
and
100 miles. This lets
you
"zoom
in" to see small
variations in
your
course or "zoom
out" to
see
yourstarting position, present
position,
track, course,
and destination.
ICON ON/OFF
Pressing
this
key
turns on the icons that
you placed
on the screen
using
the EVENT MARKER
key.
For
more information on this
feature,
see the
Event Marker section. This also turns on
all of the
waypoint
icons,
also.
ALARMS
Press this
key
forthe alarms menu. For more information
on the
alarms,
see the ALARMS
section.
CHANGE PLOTTER DISPLAY
When the GlobalNav II is first turned
on, (or
after a
preset),
the
screen has a column of
digital displays
on the left side of the screen.
displays
can be
changed
or erased
completely.
This
gives you
screen
plotter.
To
change
the
plotter display, press
the
MENU
key
while the
plotter
is
displayed.
Now
press
the
key
next to the
"Change
Plotter
Display"
label.
The menu
shown below
appears.
To
change
to a full-screen
plotter
display, press
the
key
next to
the "Full
Screen Plotter"
key.
A
plotter
similiartothe
one shown
at the
top
of the next
page
appears.
To
change digital display
boxes,
press
the
key
next to
the
"Change
Info Boxes".Ascreen
similar
to the one on the
next
page
appears.
H
w
I
nsa
SE
E
S
a
plotter
These
a full-
28
21
,CHANCE
BLOT DISPLAV
PDF compression, OCR, web-optimization with CVISION's PdfCompressor