Quick Start Guide
Sonar display settings/options
To adjust Sensitivity and Colorline:
From the Sonar page press the 1. MENU key.
Select 2. Adjust and press ENTER.
Press the keypad up/down to select Sensitivity or Colorline. Press 3.
the keypad left/right arrows to make adjustments.
Fishing
Mode
Depth Settings Palette
General Use ≤1,000 ft 50% Ping speed Bottom brown/ blue background
Shallow Water ≤ 60 ft 75% Ping speed bottom brown/white background
Fresh Water ≤ 400 ft 50% Ping speed bottom brown/white background
Deep Water ≥ 1,000 ft 50% Ping speed Deep Blue
Slow Trolling ≤ 400 ft 50% Ping speed Bottom brown/white background
Fast Trolling ≤ 400 ft Lower chart speed Bottom brown/white background
Clear Water ≤ 400 ft 50% Ping speed Bottom brown/white background
Ice Fishing ≤ 400 ft
Settings optimized to reduce interference from
other sonar units
Selecting a shing mode:
Press 1. MENU twice.
Select 2. Sonar and press ENTER.
Highlight 3. Fishing Mode and press ENTER.
Select the desired shing mode and press 4. ENTER.
*Ping speed settings in the table are shown as a percentage of the
maximum value. Ping speed values will look different on your unit.
Fishing Modes
Enhances the performance of your unit by providing preset packages of sonar
settings geared to specic shing conditions.