Quick Start Guide

To Navigate to the cursor:
From the Chart page, center the 1.
cursor over a point of interest.
Press the MENU key.
Select 2. Go to Cursor and press
ENTER.
To cancel navigation:
From the Chart menu select 1. Navigation and press ENTER.
Select 2. Cancel and press ENTER.
Go To Cursor / Cancel Navigation
MMC/SD card slot
The MMC/SD card slot allows you to view
mapping charts and save/view route, trail and
sonar log data.
Make sure the MMC card slot door is always
closed to help prevent moisture from getting
into the card slot compartment. To prevent
damage to the card slots, use care when insert-
ing cards in the card slots.
*988-10064-001*
To Create Waypoint at current position:
Press the 1. WPT/Find key to create a waypoint at the your current
position.
To Create Waypoint at the cursor position on Chart page:
Place the cursor on the Chart 1.
page where you want to set the
waypoint and press the ENTER.
Select 2. Save from the New
Waypoint menu and press
ENTER.
Waypoints