Operating Instructions and Installation Instructions

143

1. From the

NAVIGATION PAGE, press MENU|ENT or from the MAP PAGE,

press

MENU|MENU|↓ to ROUTE PLANNING|ENT|ENT.

2. Press ↓ to

(END OF ROUTE)|ENT|↓ to ADD FROM MAP|ENT. The Map Page

appears with the cursor showing.

Edit Route menu (left). Edit Route Waypoints menu (right)

with Add From Map command selected.

3. Use the Zoom keys and arrow keys to move the map and cursor until

the cursor is centered on the spot where you want your route to begin.

(If you are starting at your current position or the current cursor posi-

tion, you are already at the starting spot.)

Route creation sequence, from left: Fig. 1. Set route waypoint (1) at

11th St. & 145th Ave. Fig. 2. Zoom in; move cursor north to set point (2)

at 145th & Admiral. Fig. 3. With point (2) set, move cursor east to mark

interstate on-ramp with waypoint (3). In figures 2 and 3, notice the

rubber band line extending from the previously set waypoint to the

cursor. This line will become the course for the route.