Operating Instructions and Installation Instructions
212 
Add Fuel 
After entering the amount of fuel added to a tank in the Fuel Added 
dialog, the Add Fuel command finalizes the entry of the data. Like the 
Fuel Added dialog, the Add Fuel command will only be used when an 
amount of fuel is added that does not fill up the tank. 
Fill Tank 
You will use the Fill Tank command when calibrating a fuel flow and 
when filling up the tank without calibration. 
Adding Fuel to Tank 
Tank Location, Fuel Added and Add Fuel commands work together to 
keep NMEA 2000 fuel data consistent with the actual amount of fuel 
added to the fuel tank(s). 
1. Press 
MENU|MENU, select NMEA 2000 and press ENT. 
2. The NMEA 2000 menu will appear with five options: Bus Setup, 
Fuel Management, NMEA 2000 Alarms, Waypoint Sharing and Back-
light Synchronization. Select 
FUEL MANAGEMENT and press ENT. 
3. Highlight 
TANK LOCATION and press ENT. The Tank Location menu will 
appear with up to three options: Port, Center and Starboard. 
4. Select the tank you added fuel to and press 
ENT. 
5. Follow the steps below that apply to your tank. 
If you filled up the tank: 
A. Press the 
FILL TANK button and press ENT. The following message will 
appear:  Are you sure you wish to Fill Tank? Press 
ENT. Another mes-
sage will appear: Do you wish to re-calibrate the device? Highlight 
NO 
and press 
ENT. 
If you did not fill up the tank: 
B. Highlight 
FUEL  ADDED and press ENT to access the FUEL  ADDED dialog 
box. Use ↑ ↓ , ← → to input the amount of fuel added to the tank and 
press 
ENT. Select the ADD FUEL button and press ENT. The following mes-
sage will appear: Are you sure you wish to Add Fuel? Highlight 
YES and 
press 
ENT. 
6. Press 
EXIT repeatedly to get back to the main display. 
Engine Operations 
The lower half of the Fuel Management menu contains the following 
Engine Operation functions: Engine Select, Reset Calibration, Reset 
Trip and Reset Seasonal. 
Engine Select 
Engine Select allows you to choose the desired engine when resetting 
calibration, resetting trip fuel and resetting seasonal fuel. 










