User Manual
Table Of Contents
How to Replace the Turntable Stylus (Needle)?
Removing the Stylus from the Cartridge
1. Place a screwdriver at the tip of the stylus and push downward as shown in direction“A”.
2. Remove the stylus by pulling the stylus forward and pushing downward.
Installing the Stylus
1. Hold the tip of the stylus and insert the stylus by pressing as shown in direction “B”.
2. Push the stylus upward as in direction "C" until the stylus locks into the tipposition.
Tips to Better Turntable Performance:
1.
When opening or closing the turntable cover, handle it gently.
2.
Do not touch the needle tip with your fingers; avoid bumping the needle against the turntable
platter or record edge.
3.
Frequently clean the needle tip-use a soft brush in a “back-to-front’ motion only.
4.
If you must use a needle cleaning fluid, use very sparingly.
5.
Gently wipe the turntable player housing with a soft cloth. Use only a small amount of mild
detergent to clean the turntable player.
6.
Never apply harsh chemicals or solvents to any part of the turntablesystem.