VINTAGE TURNTABLE Model:LPSC-008 User Manual
Before Use: 1. Choose a safe location and avoid placing the unit in direct sunlight or near any heat source. 2. Avoid environments subject to vibration, excessive dust, cold or moisture. 3. Due to the risk of electrical shock, do not open the cabinet. Should a foreign object accidentally find its way into the interior of the unit, contact your local dealer. 4. Do not attempt to clean the unit with chemical solvents as this might damage the finishing. A clean, dry cloth is recommended for cleaning. 5.
1. Lift Lever 2. Tone-arm 3. 33/45/78 RPM Speed Selection Switch 4. AUTO STOP ON/OFF Switch 5. Tone Arm Clip/Rest 6. Stylus(Needle) Cartridge 7. Power Switch (VOLUME CONTROL KNOB) 8. Indicator 9. PH/BT Function Knob 10. Turntable Platter 11. 45 RPM Adapter 12. DC IN Power Jack 13. L/R RCA Output Jack Package Included: The package includes below main unit and accessories. If anything missing, please feel free to contact our after-sale service team via email LP0613@outlook.com 1.
Remark: AUTO STOP function applies to most 33RPM vinyl records. However, for very few vinyl records, it will stop when it does not come to the end (In this case, turn the AUTO STOP switch to OFF position and then it will continue playback), or it will not stop when it comes to the end when AUTO STOP is ON. 5. Turn the VOLUME CONTROL KNOB to adjust the volume. Bluetooth Mode: 1. Switch the function knob to BT. The indicator will become blue color with flashing. 2.
How to Replace the Turntable Stylus (Needle)? Removing the Stylus from the Cartridge 1. Place a screwdriver at the tip of the stylus and push downward as shown in direction “A”. 2. Remove the stylus by pulling the stylus forward and pushing downward. Installing the Stylus 1. Hold the tip of the stylus and insert the stylus by pressing as shown in direction “B”. 2. Push the stylus upward as in direction "C" until the stylus locks into the tipposition. Tips to Better Turntable Performance: 1.
LP&No.1 For more record players, visit at www.amazon.
