User Manual

7. Recording
Select the RECORD button to start recording while your record is playing.
You will need to position the needle on the record for a few seconds before the track starts,
so that you select the RECORD button at the beginning of your track.
Start playback on the USB turntable. You will see the waveform of the audio on the screen
as it is recording. You will hear the audio coming from the output of your computers
soundcard.
No Audio? - go back to the preference menu and make sure you have “Software
Playthrough” selected and the speaker volume up on your computer.
Press Stop
SAVE YOUR FILE NOW by clicking on “File” followed by “Save Project”
Select the destination and file name for the project and click “Save”
Once finished recording, your screen should display your recording as below.