Installation Instructions
TRIM & FASCIA 190, 440, 540 & 2000 SERIES
APPLICATION
INSTRUCTIONS
FINISHING INSTRUCTIONS
DO
• Prime and paint all exposed surfaces including all drip edges or where water will hang.
• Apply nish coat as soon as possible or within 180 days of application.
• Use paints and sealants that meet specications in the General Application Equipment section in this document.
• Follow the coating manufacturer’s application and maintenance instructions.
DO NOT USE
• Semi-transparent and transparent stains.
• Shake and shingle paints.
• Vinyl-based resin formulas such as vinyl acetate, PVA, vinyl acetate/acrylic copolymer paints.
CAUTION:
HANDLE PREFINISHED LP PRODUCTS WITH EXTREME CARE DURING STORAGE AND APPLICATION.
TOUCH UP ANY DAMAGE TO THE FINISH THAT MAY OCCUR DURING APPLICATION PER PREFINISHERS SPECIFICATIONS.
Cal. Prop 65 Warning: Use of this product may result in exposure to
wood dust, known to the State of California to cause cancer.
Louisiana-Pacic Corporation
414 Union St.
Nashville, TN 37219
www.lpcorp.com
www.lpsmartside.com
© 2015 Louisiana-Pacic Corporation. All rights reserved. LP and
SmartSide are registered trademarks of Louisiana-Pacic Corporation.
Printed in U.S.A.
NOTICE: Louisiana-Pacic Corporation periodically updates and revises
its product information. The information in this document is subject to
change without notice. To verify that this version is current,
call 800-450-6106.
LPZB0521 5/15
12