Installation Instructions

FIGURE 2: Closed Sot
Precision
38,76,or
190seriesor
Foundation
Series
LPSmartSide
sotpanel
Protectedgesofsheathing
againstpermanentexposure
toweather.
Leave3/16in.space
atallpanelendand
edgejointsfor16-foot
sot.Supportand
sealalledges.
FIGURE 1: Open Sot
Protectedges
ofsotagainst
permanent
exposureto
weather.
Leave1/8in.
spaceatallpanel
endandedge
jointsfor8-foot
sot.Support
andsealall
edges.
*Do not use 76 Series Foundations Sot in open sot applications.
UsePrecisionSeries
76and190series
LPSmartSidesot
panelsfordesired
appearance
andload-carrying
capacity.*
10openingsperventeachvent
measures8in.longby3.5in.wide
16ventsper16ft.piecespaced
12in.O.C.
4in.betweenvents
Allventgroups,+/-1/16in.fromspeciedlocation
Outsideedgejoiningfascia
1-15/16in.+/-1/4in.
betweenends&vents
3in.+/-
1/16in.
between
ventand
fascia
edge
FIGURE 3: Vented Sot
FIGURE 4: 12 in. Cut to Width Sot Framing Diagram
Install2xframingonwall
tofastenperimeterofthe
sotevery6in.O.C.
Installframingtosupport
andfastensotseamsonly
24in.O.C.intermediate
framingisNOTrequired
for12in.sot
LP®Fasciatobeusedwithsubfascia
FIGURE 5: 16 in. and 24 in. Cut to Width Sot Framing Diagram
Install2xframingonwall
tofastenperimeterofthe
sotevery6in.O.C.
Installframing24inO.C.to
supportandfastensot
24in.O.C.intermediateframingis
requiredfor16in.and24in.sot
LP®Fasciatobeusedwithsubfascia