Installation Instructions

TheLouisiana-PacificCorporation(“LP”)LPSmartSideSoffit(the
“Products”)limitedwarranty(the“Warranty”)appliesonlyto
structuresonwhichtheProductshavebeenapplied,finishedand
maintainedinaccordancewiththepublishedapplication,finishing
andmaintenanceinstructionsineffectatthetimeofapplication.
Thefailuretofollowsuchapplication,finishingormaintenance
instructionswillvoidtheWarrantyastotheportionoftheProducts
affectedbythevariance(the“AffectedProducts”).
LPassumesnoliabilityforanylossordamagesustainedbythe
AffectedProductsandisexpresslyreleasedbythepurchaseror
ownerfromanysuchlossorliability.
AnymodificationoftheWarranty’sapplication,finishingor
maintenancerequirementsisvoidandunenforceableunless
approvedinwritingpriortoapplicationbytheSidingGeneral
ManagerorhisdesigneeandamemberoftheLPLegalDepartment.
©2014Louisiana-PacificCorporation.Allrightsreserved.LPandSmartSideareregisteredtrademarksof
Louisiana-PacificCorporation.PrintedinU.S.A.
NOTE:Louisiana-PacificCorporationperiodicallyupdatesandrevisesitsproductinformation.
Toverifythatthisversioniscurrent,call800-450-6106.
LPZB05191/14
Foracopyofthewarrantyorforinstallationandtechnicalsupport,visitthe
LPSmartSideproductsupportWebsiteat:
orforadditionalsupportcall800-450-6106.
www.lpsmartside.com
WARRANTY REMEDIES ARE NOT AVAILABLE IF
REQUIREMENTS ARE NOT FOLLOWED.
Cal. Prop 65 Warning: Use of this product may result in
exposure to wood dust, known to the State of California
to cause cancer.
FIGURE 6: 12 in. Cut to Width Sot Nailing Diagram
Fastenevery6in.O.C.
alongperimeter
Installframingtosupportandfastenseams.
Gap3/16in.andcaulkjoint.Ifjointmoldingoption
isselected,addthethicknessofthewebtothe
gapallowinganet3/16in.spaceforexpansion.
24in.O.C.intermediate
framingisNOTrequired
for12in.sot
(Nailsenlarged
toshowdetail)
FIGURE 7: 16 in. & 24 in. Cut to Width Nailing Framing Diagram
Fastenevery6in.O.C.
alongperimeter
Supportandfastenseamsover
maximum24in.O.C.framing.
Gap3/16in.andcaulkjoint.If
jointmoldingoptionisselected,
addthethicknessofthewebto
thegapallowinganet3/16in.
spaceforexpansion.
Fastenatpanelcenter
intorequiredintermediate
24in.O.C.framing
(Nailsenlarged
toshowdetail)
LP®Fasciatobeusedwithsubfascia
LP®Fasciatobeusedwithsubfascia