FAQ

Date: November 2009
Preceding Version: June 2009
6
Precision Series products and to NER-626 for Foundation Series and some
Architectural Series LP SmartSide siding.
44. Can I use LP SmartSide® siding in Canada?
a. Yes, refer to CCMC listings 11826 and 12353
45. Will freezing conditions affect the performance of LP SmartSide® siding?
a. LP SmartSide products are resistant to freeze thaw damage.
46. Can LP SmartSide® siding be used in humid climates?
a. Yes, it is designed and tested to withstand wet humid conditions. Some
restrictions do apply to certain Foundation Series siding products.Refer to
the LP SmartSide limited warranty for additional details..
47. How is the LP SmartSide® Precision Series siding different from OSB?
a. Commodity OSB sheathing and LP SmartSide Precision Series siding both
use geometrically controlled wood strands to provide superior strength
and stiffness. LP SmartSide Precision Series siding is treated with the
SmartGuard® process, bonded together with increased levels of a durable
exterior binder system, overlaid with a resin-impregnated prime-base
overlay, and edge coated with a proprietary water-resistive primer coat.
48. How is LP SmartSide Foundation Series siding different from hardboard?
a. LP SmartSide Foundation Series siding is the only fiber based siding
product in the world treated to resist decay fungi and termites with the
SmartGuard process
49. How long is the LP SmartSide® warranty?
a. The LP SmartSide limited warranty is a 50-year warranty with a 5-year
repair or replace feature. Refer to the LP SmartSide warranty for details.
50. Can LP SmartSide® siding and trim be installed so it contacts the ground?
a. No. LP SmartSide siding is designed to be used in above-ground
applications.
51. Why do I have to space the joints of the LP SmartSide® siding and trim?
a. LP SmartSide products expand as their moisture content balances with
jobsite conditions after it is installed. It is important to properly space the
joints 3/16-inch so there available room for the siding to expand.
52. Can I rip the LP SmartSide trim?
a. Ripping the trim, and fascia is not recommended, as it will leave the
edges unprotected. If the material is ripped, special care must be taken to
prime, paint, and seal all exposed wood fiber as described in the finishing
section of the respective installation instructions.
53. Can LP SmartSide trim be used as fascia without a subfascia?
a. Yes, certain LP SmartSide Fascia can be installed without a subfascia but it
cannot be used structurally. Refer to the installation instructions for
proper installation.
54. Can I use a finishing or casing nail on LP SmartSide® trim?
a. No. A corrosion resistant box or common style must be used. Refer to the
installation instructions for proper installation.
55. How long should I wait before I paint my LP SmartSide® Trim and Siding?