Installation Guide
For a copy of the warranty or for installation and technical support, visit
the LP SmartSide product support Web site at:
or for additional support call 800.450.6106.
www.lpcorp.com
WARRANTY REMEDIES ARE NOT AVAILABLE IF
REQUIREMENTS ARE NOT FOLLOWED.
NEVER NAIL INTO
EDGES WITHOUT
PRE DRILLING
DO NOT MITER
EDGES
SEAL AND PAINT
M
DO NOT MITER
CUT THE
CORNER JOINT
G E
FASCIA DETAIL
FASCIA
SOFFIT
TRIM
Ridge
First
common rafter
End or verge
rafter
Barge rafter
2x or 4x lookouts
Fascia
Ridge
First
common rafter
End or verge
rafter
Barge rafter
2x or 4x lookouts
Fascia
F R B C
F
• Primeandpaintallexposedsurfacesincludingalldrip
edges or where water will hang.
TrimBoard
TrimBoard
2" x 6"
Blocking
Rafter
Cal. Prop 65 Warning: Use of this product may result in exposure to
wood dust, known to the State of California to cause cancer.
Application instructions (cont.)
© 2012 Louisiana-Pacific Corporation. All rights reserved. LP, SmartSide, SilverTech and SmartFinish
are registered trademarks of Louisiana-Pacific Corporation. Printed in U.S.A.
NOTE: Louisiana-Pacific Corporation periodically updates and revises its product information.
To verify that this version is current, call 800-450-6106.
LPZB0521
Figure 9
Figure 10
Figure 11
Figure 12
Figure 13