SDS

Preparation Date: 24/July/2017 Page 3 of 20 Format: EU CLP/REACH Language: English (US)
Revision Date: 30/November/2017 EU CLP, OSHA HCS 2012, WHMIS 2015
Prevention
•
Do not handle until all safety precautions have been read and understood.
Avoid breathing dust.
Use (saw, sand, etc.) only outdoors or in a well-ventilated area.
Wear protective gloves/protective clothing/eye protection/face protection.
In case of inadequate ventilation wear respiratory protection.
Response
•
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician.
If on skin: Wash with plenty of water.
If skin irritation or rash occurs: Get medical advice/attention.
Wash contaminated clothing before reuse.
IF exposed or concerned: Get medical advice/attention.
Storage/Disposal
•
Dispose of content and/or container in accordance with local, regional, national, and/or
international regulations.
2.3 Other hazards
OSHA HCS 2012
•
Under United States Regulations (29 CFR 1910.1200 -
Hazard Communication Standard),
this product is considered hazardous.
Canada
According to: WHMIS 2015
2.1 Classification of the substance or mixture
WHMIS 2015
•
Not classified
2.2 Label elements
WHMIS 2015
Hazard
statements
•
No label element(s) required
Precautionary
statements
2.3 Other hazards
WHMIS 2015
•
Under Canadian regulations (Workplace Hazardous Materials Information System (WHMIS) -
Hazardous Products Act (HPA), Section 11(1)), these product(s) are exempt and considered
manufactured article(s) under stated normal conditions of use.
2.4 Other information
•
•
This product is not hazardous in the form in which it is shipped by the manufacturer but health
and/or physical hazards may be created by downstream activities (e.g., cutting, sanding,
milling) that reduce its particle size. Those hazards are described above.
This may be a treated engineered wood article:
• Treated panel, siding, trim, laminated strand lumber (LSL), or I-Joist products which
incorporate a biocidal product to control wood destroying organisms (insect or fungal).
Active Ingredient: Boric Acid.
• Treated I-Joist or laminated veneer lumber products which incorporate a biocidal
product to control wood destroying organisms (insect). Active Ingredients: Bifenthrin,
or Imidacloprid.
• When working with any of the treated products, the following is recommended:
Use (saw, sand, etc.) only outdoors in a well-ventilated area. Avoid breathing wood
dust. In case of inadequate ventilation, wear respiratory protection. Wear appropriate
PPE (gloves, eye, and face protection). Do not eat, drink or smoke when using this
product. Wash thoroughly with soap and water after handling and before eating,
drinking, or using tobacco. Avoid prolonged and repeated contact with the skin. Store