User's Manual

Page 4
19 inch SXGA TFT LCD Color Monitor
• Connect the 15-pin D-sub connector to the VGA port of PC.
• Connect the opposite side of VGA cable to TFT LCD monitor.
• Plug in the Audio cables to the proper connecter of your monitor.
• Plug in the power cord to AC/DC adapter power inlet and 110V / 220V consent.
• Plug in the 12V DC output to TFT LCD monitor.
• Turn on PC and TFT LCD monitor.
• Adjust the display. (SXGA, 1280x1024 pixels, 24 bit color)
1. QUICK START
2. PRODUCT OVERVIEW
This 19” SXGA TFT LCD Monitor, accepts standard analog RGB signal.
This monitor supports SXGA and lower resolutions at the frame frequency up to 75Hz.
Lower resolution modes can be expanded to full screen through the expansion
algorithm. The user interface includes Audio, Display, Scaling, Control, Auto Adjust,
and additional features.
This monitor contains high-end LCD controller, which have high performance and user
friendly interfaces. Fancy design monitor makes your desk simple and luxury.
The LCD monitor neither emits harmful rays nor requires space. Moreover, it
conforms to VESA DPMS (Display Power Management Signaling) requirement,
therefore energy consumption is remarkably little. Actual power consumption of LCD
monitor is less than 48 watts during the operation, in contrast CRT monitor. These
features guarantee you with safe, clean, and healthy environment.
3. PLUG & PLAY
This monitor supports VESA DDC 1/2B requirements, therefore it is truly Plug-and-
Play for all PCs. No hardware or software change needed. It finds optimum setting
value automatically without any diskette installation by DDC process.
• DDC Process
Abbreviation of ‘Display Data Channel’.
The format of data exchange between Monitor & VGA Card.