User's Manual

●The oldest files (except the IMP files) can be overwritten when the memory card is going to
overflow.
●The IR switch mode can be “Auto” and “Manual”. “Auto” means IR will automatically switch
depends on ambient light illumination, “Manual” means that holding the “IR” button for 3
seconds to switch IR.
●The microphone volume can be choose from 0 to 10. The higher of the setting value, the
more sounds information device can get from the surrounding.
●The speaker volume can be from 0 to 10. The default volume is 9.
●Voice reminder is to turn On/Off the “beep” when pressing buttons. Is NOT including record
and snap reminder.
●External audio includes “Headphone”, “Interphone”, “None” 3 options. The setting should
refers to the external device connected with camera.
●File length means the length of the saved video for recording. You can select from 5 mins to
30 mins.
●“Record Encrypt” means that the video is encrypted when you record, the encrypted video
can be played with special player, the default password is 888888.
●Pre-Recording means that device records 10 seconds video and store in RAM cyclically in
advance when you press the “record” button.
●Post-Recording means that dev ice will remain recording within the setting time after you
press the “record” button to end the record. The options include 5s, 10s, 20s, off.
●Time Sync means that device can sync it’s time with internet.
●The default laser setting is “disable”, which means that you can NOT turn on laser light by
pressing “IR/Laser” button, to turn on the laser you must change the setting to “enable” to.
●When the password protect is ON, it needs you toenter the password to get into the setting
and playback interface.
●Set the language for the device. According to the bodycamera’s registration, the default is
English.