Product Description

Coordinator RouterEnd Device
CO2 PM2.5
LUXUV TVOC
Product name:
Sensing Monitoring
Company:
Logistics and Supply Chain MultiTech R&D
Centre Limited
Address: Units 1101-1105 and 1109, Level 11
Cyberport 2, 100 Cyberport Road, Hong Kong
Contact email: [e-mail]
Website: www.lscm.hk
Product description:
- A series of sensing system for real-time
environmental monitoring, using Zigbee
wireless technology for transferring sensor
data, can operate online and offline
Product includes the following devices:
End Device and Sensors instructions:
1. Select the sensors that are required
2. Plug the sensors into the end device
3. Place the end device with the sensors at
your chosen location
4. Choose the power source of the end device
by sliding the slide switch on the side
5. Either plug a micro USB cable to the side,
supplied by a 5V DC power source, or use 2x
AA alkaline batteries
6. Turn on the end device by pressing the side
button
7. Using the side button, choose offline or
online data collection
Router Instructions:
1. Plug in a 5V DC USB adapter (not supplied)
into the rear slot of the router
2. Plug the router with the USB adapter into a
wall plug
3. Turn on the router by pressing the front
button
Coordinator Instructions:
1. Either plug a 5V DC USB adapter (not
supplied) into the rear slot of the coordinator,
or plug into the DC jack with a 24V DC power
source
2. Plug in an ethernet cable into the RJ45 slot
(if needed)
3. Turn on the coordinator by pressing the
front button
End Device:
2pcs AA alkaline batteries or Micro USB 5V
DC
Router:
Type A USB 5V DC
Coordinator:
Type A USB 5V DC or DC Jack 24V DC/500mA
FCC warning:
Caution: The user is cautioned that changes or
modifications not expressly approved by the
party responsible for compliance could void
the user's authority to operate the equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged
to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the
equipment and receiver.
-- Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced
radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be
installed and operated with a minimum
distance of 20cm between the radiator and
your body.
This transmitter must not be co-located or
operating in conjunction with any other
antenna or transmitter.
Battery Warning:
a) disposal of a battery into fire or a hot oven,
or mechanically crushing or cutting of a
battery, that can result in an explosion
b) leaving a battery in an extremely high
temperature surrounding environment that
can result in an explosion or the leakage of
flammable liquid or gas.