Logic Host Adapter User Guide

3-10 Software Installation
Figure 3.6 Completing Floppy Disk Installation
See Figure 3.8 for additional information.
Figure 3.7 Completing Floppy Disk Installation (Continued)
To support nonzero LUNs, which is default for most RAID controllers
such as the LSI Logic MetaStor
®
,you must edit the file
/kernel/drv/ssd.conf as shown in Figure 3.8:
This package contains scripts which will be executed with
superuser permission during the process of installing this
package.
Do you want to continue with the installation of <ITImpt>
[y,n,?] y
Installing LSI Logic/IntraServer FusionMPT(tm)
Fibrechannel/SCSI drivers as <ITImpt>
## Installing part 1 of 1.
/kernel/drv/itmpt
/kernel/drv/itmpt.conf
[ verifying class <none> ]
## Executing postinstall script.
installing /kernel/drv/sparcv9/itmpt
Updating /kernel/drv/ssd.conf with itmpt entries...
Entries added. For support of more than 15 targets or nonzero
LUNs it may be necessary to edit /kernel/drv/ssd.conf to add
additional entries.
Following installation, please reboot the system to properly
configure and load the drivers.
Installation of <ITImpt> was successful.