Logic Use's Guide Network Adapter SI40919O,LSI40919LO,LSI40919H,LSI40919LH,LSI44929O,LSI44929LO, LSI44929H,LSI44929LH,ITI7004G2-LC

IEEE Unique Address 2-7
Ver. 2.0 Copyright © 2002 by LSI Logic Corporation. All rights reserved.
2.4.2 The FC Interface
The FC interface varies, depending on which specific LSI Logic 2 Gbit/s
host adapter you have selected. See Section 2.6 for more information.
2.4.3 The FC Link Activity/Link Fault LED
The LSI Logic 2 Gbit/s optical host adapter boards provide dual-purpose
LEDs (one per port), visible through the bracket, which indicate activity
on the FC link. Table 2.4 shows the appearance of the Link Activity/Link
Fault LED for the given link status for each of the LSI Logic optical host
adapters.
2.5 IEEE Unique Address
Each LSI Logic 2 Gbit/s host adapter channel is provided with a unique
World Wide Name, specified by IEEE. The last six hexadecimal
characters of this address appear on a label on the board. This address
is stored in the serial EEPROM on the board.
2.6 Physical Characteristics
The LSI Logic 2 Gbit/s Fibre Channel host adapters include one to four
external Fibre Channel connectors, and are available with copper or
optical interconnect options. No configuration of the adapter is
necessary.
Table 2.4 Appearance of LED to Represent Link Status
Adapter Link Activity Fault
LSI40919O Off Green Blinking Yellow
LSI40919LO Off Green Blinking Yellow
LSI44929O Off Green Blinking Yellow
LSI44929LO Off Green Blinking Yellow
ITI7004G2-LC Green Green Blinking Yellow