User's Manual

Main Menu 4-5
Copyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.
current page before new entries may be viewed or modified. A pop-up
confirmation window asks to store or discard changes, if needed.
4.4.3 Device Properties Menu
The Device Properties menu allows you to view and update individual
device settings for an adapter.
Note: The number of fields on the menu requires that you scroll
left/right to view all the information. When accessing this
menu, use the HOME and END keys to scroll to columns
currently not displayed. The scroll indicator on the bottom
of the menu shows the position of the cursor relative to the
first and last columns.
4.4.4 Boot Adapter List Menu
The Boot Adapter List menu specifies the order in which adapters boot
when more than one LSI Logic host adapter is in a system. Up to four
adapters in a system can be selected as bootable. Only one of the four
bootable adapters can control a boot volume.
To select this menu:
1. Press F2 while on the Main menu to move the cursor to the menu
area.
2. Move the cursor to Boot Adapter List with the arrow keys.
3. Press ENTER.
Adapters can be added or deleted using this menu. To add an adapter
to the boot list, press the INSERT key while on the Boot Adapter List.
Use the arrow keys to select the desired adapter, and press ENTER to
add it to the end of the Boot Adapter List.
To remove an adapter from the boot list, press the DELETE key while
the desired adapter is selected in the Boot Adapter List. You can also
change the boot order by using the PLUS or MINUS keys. For example,
place the cursor on the adapter that you want to change, and use the
PLUS or MINUS key to raise or lower the boot order, respectively.