Logic Use's Guide Network Adapter LSI8751D

Detailed Installation Procedure 2-17
2.2.4.3 Internal and External SCSI Connections
If you make internal and external SCSI device connections to the host
adapter, you must terminate the last internal device and external device
on the SCSI bus. You must disable the termination on all other devices.
Termination on the host adapter is not required in this case. Save the
plug-in HVD terminator so you can change the SCSI bus configuration in
the future.
Figure 2.14 shows you how to enable or disable termination for this SCSI
bus configuration.