Logic Use's Guide Network Adapter LSI8751D

Completing the Installation 2-21

2.3 Completing the Installation

Before replacing the cover on your computer, review this installation

procedure check list. This can save you effort later.

Step 1. Replace the cabinet cover on your computer.

Step 2. Plug in all power cords, and switch on power to all devices and

your computer.

Step 3. Wait for your computer to boot up.

Step 4. Refer to the PCI Storage Device Management System SDMS

4.0 User’s Guide (or the guide for the software you plan to use)

to load the driver software for your particular operating system.

To change the conﬁguration of your host adapter, if needed,

refer to this same guide.

Verify Installation Procedures Done

Host adapter connection in PCI bus slot secure

Internal SCSI bus connections secure (pin-1 continuity)

External SCSI bus connections secure

Proper SCSI bus termination established

Unique SCSI IDs set and recorded for each device